Application Unit

19/168-1000 Trapezoidal Sheet

19/168-1000 corrugated sheet form; has 7 ribs with 19 mm height , 168 mm rib distance and 1000 mm cover width. It can be produced from the materials Carbon Steel, Prepainted Galvanised Steel (PPGI) , Galvanised Steel (GI), Stainless Steel (St.S) and Aluminium ; and generally preferred for facade cladding due to the high number of ribs and low rib height as well as preferred for roofing sublayer where purlin spacing is low.

Unprocessed Sheet Width 1.120 Mm
Useful Covering Width 1.000 Mm
Number of Ridges 7 Pieces
Ridge Height 19 Mm
Ridge Width 144 Mm
Sheet Thickness 0,35 – 1,00 Mm
Sheet Type Painted Galvanized – Galvanized – Aluminum
Paint Type Polyester – PVDF – Plastisol

19 / 1000 Formed Trapezoidal Sheet Spread Load Bearing Table (Multi Span Kg/m2)

Sheet Thickness Weight 0,75 Mt 1,00 Mt 1,25 Mt 1,50 Mt 1,75 Mt 2,00 Mt 2,25 Mt 2,50 Mt 2,80 Mt 3,00 Mt
0,40 Mm  3,52 169  155  114  76  –  –  –  –  –  – 
0,50 Mm  4,40 230  208  188  138  102  78  –  –  –  – 
0,60 Mm  5,28 288  256  228  168  124  95  73  –  –  – 
0,70 Mm 6,16  352  308  270  198  145  111  86  –  –  – 
0,80 Mm  7,04 403  354  311  228  167  128 99  66  –  – 
0,90 Mm  7,92 460  401  349  257  189  145  111  75  –  – 

Calculations were made in accordance with TS EN 14509.
Self weight, live load, wind load and temperature variation (Δt=20 °C) are taken into account.
The deflection limit of L/200 is used.
Calculations were made by TİCEM Advanced Construction Technologies.
Please consult Eska Metal for transports not included in the load chart.