19/168-1000

    19/168-1000 corrugated sheet form; has 7 ribs with 19 mm height, 168 mm rib distance and 1000 mm cover width. It can be produced from the materials Carbon Steel, Prepainted Galvanised Steel (PPGI), Galvanised Steel (GI), Stainless Steel (St.S) and Aluminium; and generally preferred for facade cladding due to the high number of ribs and low rib height as well as preferred for roofing sublayer where purlin spacing is low.
    Technical Information
    Unprocessed Sheet Width
    1120 mm
    Useful Coating Width
    1000 mm
    Number of Ribs
    7 Pieces
    Rib Height
    19 mm
    Width Between Ribs
    168 mm
    Sheet Metal Thickness
    0,35 - 1,20 mm
    Sheet Type
    DKP - Painted Galvanized - Galvanized - Aluminum - Stainless Steel
    Paint Type
    Polyester - PVDF - Plastisol
    19/1000 Formed Trapezoidal Sheet Spread Load Carrying Table (multi-span kg/m²)
    Sheet Thickness
    Weight (Kg/m²)
    0,75 m
    1,00 m
    1,25 m
    1,50 m
    1,75 m
    2,00 m
    2,25 m
    2,50 m
    0,40mm
    3,52
    169
    155
    114
    76
    -
    -
    -
    -
    0,50 mm
    4,40
    230
    208
    188
    138
    102
    78
    -
    -
    0,60 mm
    5,28
    288
    256
    228
    168
    124
    95
    73
    -
    0,70 mm
    6,16
    352
    308
    270
    198
    145
    111
    86
    -
    0,80 mm
    7,04
    403
    354
    311
    228
    167
    128
    99
    66
    0,90 mm
    7,92
    460
    401
    349
    257
    189
    145
    111
    75
    • Calculations were made in accordance with TS EN 14509.
    • Self-weight, live load, wind load and temperature change (Δt=20 °C) were taken into consideration.
    • L/200 deflection limit was used.
    • Calculations were made by TİCEM Advanced Building Technologies.
    • Please consult Eska Metal for transports not included in the load table.