55/225 - 900

    55/225-900 corrugated sheet form; has 5 ribs with 55 mm height, 225 mm rib distance and 900 mm cover width. It can be produced from the materials Prepainted Galvanized Steel (PPGI) and Aluminium; and preferred especially for roofing as sublayer due to its 55 mm rib height and high load bearing capacity. It can also be used as single layer roofing using 1.220 mm coils.
    Technical Information
    Alternative RAL Codes

    Unprocessed Sheet Width
    1220 mm
    Useful Coating Width
    900 mm
    Number of Ribs
    5 Pieces
    Rib Height
    53 mm
    Width Between Ribs
    225 mm
    Sheet Metal Thickness
    0,50 - 1,20 mm
    Sheet Type
    Painted Galvanized - Galvanized - Aluminum
    Paint Type
    Polyester - PVDF - Plastisol
    55 / 900 Formed Trapezoidal Sheet Spread Load Carrying Table (multi-span kg/m²)
    Sheet Thickness
    Weight (Kg/m²)
    1,25 m
    1,50 m
    1,75 m
    2,00 m
    2,50 m
    3,00 m
    3,25 m
    3,50 m
    3,75 m
    4,00 m
    0,50 mm
    5,33
    428
    362
    295
    235
    150
    102
    61
    -
    -
    -
    0,60 mm
    6,39
    615
    518
    420
    330
    210
    135
    106
    90
    71
    -
    0,70 mm
    7,46
    780
    655
    530
    415
    260
    165
    131
    115
    92
    80
    0,80 mm
    8,52
    938
    788
    638
    500
    315
    200
    152
    125
    98
    95
    0,90 mm
    9,59
    1027
    865
    703
    545
    371
    221
    175
    141
    107
    101
    1,00 mm
    10,56
    1097
    929
    767
    600
    450
    275
    213
    175
    137
    120
    • Calculations were made in accordance with TS EN 14509.
    • Self-weight, live load, wind load and temperature change (Δt=20 °C) were taken into consideration.
    • L/200 deflection limit was used.
    • Calculations were made by TİCEM Advanced Building Technologies.
    • Please consult Eska Metal for transports not included in the load table.