38/151 - 906

    38/151-906 Trapezoidal sheet form; It consists of a total of 7 rolls with 38 mm roll height, 151 mm distance between rolls and 906 mm effective width.
    This form, which can be produced from DKP, Painted Galvanised Sheet, Galvanised Sheet or Aluminium materials, can be preferred as a single layer in roof and facade coatings or can be used as the first or last layer in all coatings.
    Technical Information
    Unprocessed Sheet Width
    1200 mm
    Useful Coating Width
    906 mm
    Number of Ribs
    7 Pieces
    Rib Height
    38 mm
    Width Between Ribs
    151 mm
    Sheet Metal Thickness
    0,35 - 1,20 mm
    Sheet Type
    DKP - Painted Galvanized - Galvanized - Aluminum - Stainless Steel
    Paint Type
    Polyester - PVDF - Plastisol
    38 / 151 Formed Trapezoidal Sheet Spread Load Carrying Table (multi-span kg/m²)
    Sheet Thickness
    Weight (Kg/m²)
    1,00 m
    1,25 m
    1,50 m
    1,75 m
    2,00 m
    2,25 m
    2,50 m
    2,80 m
    3,00 m
    3,30 m
    0,50 mm
    5,24
    368
    314
    266
    222
    184
    151
    123
    96
    82
    69
    0,60 mm
    6,29
    432
    370
    313
    263
    218
    178
    144
    111
    94
    79
    0,70 mm
    7,34
    507
    435
    369
    310
    257
    210
    169
    129
    109
    90
    0,80 mm
    8,38
    396
    512
    435
    366
    303
    248
    199
    150
    125
    103
    0,90 mm
    9,43
    700
    602
    512
    431
    358
    293
    234
    174
    144
    117
    1,00 mm
    10,48
    822
    708
    604
    509
    423
    345
    274
    202
    166
    134
    • Calculations were made in accordance with TS EN 14509.
    • Self-weight, live load, wind load and temperature change (Δt=20 °C) were taken into consideration.
    • L/200 deflection limit was used.
    • Calculations were made by TİCEM Advanced Building Technologies.
    • Please consult Eska Metal for transports not included in the load table.