27/200 - 800/1000

    27/200-1000 corrugated sheet form; has 6 ribs with 27 mm height, 200 mm rib distance and 1000 mm cover width. It can be produced from the materials Carbon Steel, Prepainted Galvanised Steel (PPGI), Galvanised Steel (GI), Stainless Steel (St.S) and Aluminium; and preferred for roof or facade cladding as single layer, also as first or last cladding layer. Alternatively, same form can be produced with 5 ribs and 800 mm cover width while using 1000 mm coil.
    Technical Information
    Unprocessed Sheet Width
    1000 - 1200 mm
    Useful Coating Width
    800 / 1000 mm
    Number of Ribs
    5 / 6 Pieces
    Rib Height
    27 mm
    Width Between Ribs
    200 mm
    Sheet Metal Thickness
    0,35 - 1,20 mm
    Sheet Type
    DKP - Painted Galvanized - Galvanized - Aluminum - Stainless Steel
    Paint Type
    Polyester - PVDF - Plastisol
    27 / 200 Formed Trapezoidal Sheet Spread Load Carrying Table (multi-span kg/m²)
    Sheet Thickness
    Weight (Kg/m²)
    1,00 m
    1,25 m
    1,50 m
    1,75 m
    2,00 m
    2,25 m
    2,50 m
    2,80 m
    3,00 m
    3,30 m
    0,40 mm
    3,77
    255
    202
    157
    120
    90
    68
    -
    -
    -
    -
    050 mm
    4,72
    313
    249
    194
    149
    112
    86
    68
    -
    -
    -
    0,60 mm
    5,28
    369
    294
    230
    177
    134
    103
    83
    74
    -
    -
    0,70 mm
    6,60
    433
    346
    271
    208
    159
    122
    98
    86
    -
    -
    0,80 mm
    7,55
    509
    407
    319
    246
    188
    144
    115
    100
    102
    81
    0,90 mm
    8,49
    598
    478
    376
    290
    221
    170
    135
    116
    117
    100
    • Calculations were made in accordance with TS EN 14509.
    • Self-weight, live load, wind load and temperature change (Δt=20 °C) were taken into consideration.
    • L/200 deflection limit was used.
    • Calculations were made by TİCEM Advanced Building Technologies.
    • Please consult Eska Metal for transports not included in the load table.